Have you heard your friends and neighbors talk about their sump pump after a really bad rain storm? But have you ever heard someone say something negative about their sump pump? Nope!
They’re usually saying that if it wasn’t for their sump pump, they’d be ankle deep in water and water damage bills. For those who still have not bought one and aren’t sure if it’s right for them just look at this 1.6HP Stainless Steel Water Pump and you will see that this is the decision that you need to make.
The weight of this item is just under 10 lb and the dimensions are 14.4 x 9.6 x 7.4 inches. With its 115 volts, 1HP motor this item proves once again that it is a perfect choice for your household. The max flow rate stands at 3566 GPH and the max lift is 29.5 ft. While the unit has some metal components, it is mainly constructed out of plastic.
Another important key characteristic is the Max Liquid Temperature – 130 degrees. Similar to most sump pumps, this one is also not suitable for hot water. The discharge bore is 1.5 inch which is perfectly compatible to the flow rate of the pump.
What will it do?
Experiencing moisture in the basement of your home could be due to foundation cracks that could eventually lead to flooding if there’s enough rain or improper drainage of water from the gutter. That is why a sump pump just needs to be installed. This sump pump can be used for a lot of other things too.
The pump is compatible with a tank and could also work as a well pump or booster pump. It can be widely applied in a garden. Even if your property is not leveled, you will have no issues pumping water because of the 29 ft lift. The PSI level of the unit makes this water pump perfect for irrigation, water transport or water pumping. The fact that the device is fully submersible completely enhances the aforementioned activities.
Try your best and dig the pit a little wider than the body of the pump. That is in case you are going to use it in a basement. Fill the buffer with some rocks in order to make sure no debris makes its way into the lining. Next, you want to make sure that the outlet is far away from the pit. Don’t use an extension cord.
Here are a few steps that you need to follow in order for your sump pump to be in a perfect condition. You have to keep in mind that adding some pilot water to the head of the pump will help accelerate the flow rate of inlet.
Impurities may cause a jam in case the debris have a diameter wider than 1mm. And last but not least, there is a dewatering outlet designed for draining the leftover water in the machine if it isn’t in use for a long time. The water inlet and outlet need to be sealed up when you connect the pipes.
- Light plastic body with safe and easy carry handle for portability.
- Multi fitting elbow
- Designed for continuous duty
- Self-priming design
- Fairly powerful.
- It runs continuously and will automatically shut off if water drops to the level of the pump.
- Can be a bit noisy.